Novell EDIRECTORY 8.8 SP3, Administration Manual, Page: 204 / 634

204 Novell eDirectory 8.8 Administration Guide
n
ov
do
cx (e
n)
11
Ju
ly 20
08
ndsimonhealth
The ndsimonhealth configuration file lets you modify default settings for the Agent Health page.
You can enable or disable Agent Health options, set reporting levels and ranges for options, and set
server reporting levels.
There are three types of options you can set in the ndsimonhealth configuration file.
Š
Enable/disable only options
To disable an option, remove the pound sign (#) from in front of the option and replace any
levels listed after the colon (:) with OFF. To set reporting levels of these options, remove the #
character from in front of the option and add a reporting level after the colon. Valid levels are
WARN, MARGINAL, and SUSPECT. For these options, you can input only one reporting
level.
Š
General options that take a range of settings
These options can be enabled and disabled or have their reporting level set, as well as the
ranges for those reporting levels.
To set the reporting level for any of these options, use the option name followed by -active: and
the reporting levels you want. For example, to set time_delta active, add the following line to
the configuration file:
time_delta-active: WARN
To set time_delta inactive, add the following line to the configuration file:
time_delta-active: OFF
When entering ranges, the specified range is the range that this reporting level should not be
displayed for.
See the time_delta example below for an example of how to set an option to be active for all
three reporting levels and how to set the ranges. In this example, anything not in the range -2 to
2 is at least marginal, anything not in the range -5 to 5 is at least suspect, and anything not in the
range -10 to 10 is a warning.
time_delta-active: WARN | SUSPECT | MARGINAL
time_delta-Min_Warn: -10
time_delta-Min_Suspect: -5
time_delta-Min_Marginal: -2
time_delta-Max_Marginal: 2
time_delta-Max_Suspect: 5
time_delta-Max_Warn: 10
For help on any of these options, enter the following URL in iMonitor:
http:// XXX.XXX.XXX.XXX : PORT /nds/help?hbase=/nds/health/OPTION_NAME
Server Configuration File
NetWare
sys:\system\ndsimonhealth.ini
Windows
install directory \novell\NDS\ndsimonhealth.ini
Linux, Solaris, and AIX
/etc/opt/novell/eDirectory/conf/
ndsimonhealth.conf