manualshive.com logo in svg

Novell EDIRECTORY 8.8 SP3, Administration Manual, Page: 351 / 634

Share
Download
Novell EDIRECTORY 8.8 SP3 Administration Manual Download Page 351

Configuring LDAP Services for Novell eDirectory

351

n

ov

do

cx (e

n)

  11
 Ju

ly 20

08

3

Select a connection, server, or DNS name or IP address, then click 

OK

.

4

Provide your password, then click 

OK

.

5

Click 

LDAP Agent for Novell eDirectory 8.8

.

The Module Information section displays 

nldap.nlm

 in the filename field.

Loaded on Linux and UNIX

Identify 

libnldap.so

 or 

libnldap.sl

. This name might only be a symbolic link to a longer 

filename that has version information appended. 

Also, each 

libnldap.so

 or 

libnldap.sl

 file is a different binary for each Linux and UNIX 

platform.

You can also use the 

ndsd.log

 file or ndstrace to check whether the LDAP server is loaded.

14.3  Verifying That the LDAP Server Is Running

After the LDAP server is loaded, verify that it is running. Then verify that a device is listening.

Š

“Scenarios” on page 351

Š

“Verifying That The LDAP Server Is Running” on page 352

Š

“Verifying That A Device Is Listening” on page 353

14.3.1  Scenarios

Typically, the LDAP server runs as soon as it is loaded. However, either of two scenarios can 
prevent the server from running properly.

Scenario: The Server Is in a Zombie State. 

The LDAP server loads as long as the NetWare or 

DHost Loaders can resolve external dependencies. However, the LDAP server doesn't run properly 
until it can get a valid configuration from the two configuration objects (the LDAP Server and 
LDAP Group objects).

While the LDAP server is in a loaded-but-not-running (zombie) state, it periodically tries to find and 
read the configuration objects. If the objects are misconfigured or corrupted, the LDAP server stays 
in the zombie state until the server (

nldap.nlm

, 

nldap.dlm

, 

libnldap.so

, or 

libnldap.sl

) is unloaded or taken down.

The Loaders show that the LDAP server is loaded, but no LDAP ports (389, 636) are opened by 

nldap.nlm

 (or 

nldap.dlm

, 

libnldap.so

, or 

libnldap.sl

). Also, no LDAP client 

requests are serviced.

DSTrace messages will show the periodic attempts and the reason why the server cannot come up to 
the running state.

Scenario: Denial of Service 

. At Digital Airlines, the server is processing a very long (20 minutes 

or more) search operation. The search is, in effect, looking for a needle in a haystack.

During this search, Henri does one of the following:

Š

Changes a configuration parameter and updates a configuration object.

Š

Clicks Refresh Server Now.

Summary of Contents for EDIRECTORY 8.8 SP3



























































































































































































































































































































































































































































































































































































































































Reviews:

No comments