Novell EDIRECTORY 8.8 SP3, Administration Manual, Page: 250 / 634

250 Novell eDirectory 8.8 Administration Guide
n
ov
do
cx (e
n)
11
Ju
ly 20
08
Figure 10-4
Encrypted Replication at Partition Level
The configurations for encrypted replication at the partition level are overridden if you have
encrypted replication configurations at replica level. Refer to
Table 10-1 on page 249 .
Backward compatibility depends on whether the encrypted replication is enabled or disabled at the
partition level. Refer to
Section 10.2.2, “Adding a New Replica to a Replica Ring,” on page 253 for
more information.
You can enable encrypted replication at the partition level using iManager or LDAP, as explained in
the following sections:
Š
“Enabling Encrypted Replication at the Partition Level using iManager” on page 250
Š “Enabling Encrypted Replication at the Partition Level Using LDAP” on page 250
Š
“Partition Operations” on page 253
Enabling Encrypted Replication at the Partition Level using iManager
1 Click the Roles and Tasks button Description: Roles and Tasks Button .
2 Click eDirectory Encryption > Replication .
3 In the Encrypted Replication Wizard, select Encrypt All Replica Synchronization .
Help is available throughout the Wizard.
NOTE: To disable encrypted replication at the partition level, unselect Encrypt All Replica
Synchronization .
In the Encrypted Replication Wizard, when you enable encrypted replication for the whole partition,
you can disable encrypted replication for specific replicas. The replicas that you disable for
encrypted replication will not receive or send data in encrypted form. You can also disable
encryption for the entire partition by deselecting
Encrypt All Replica Synchronization .
Enabling Encrypted Replication at the Partition Level Using LDAP
IMPORTANT: We strongly recommend you to use iManager for enabling encrypted replication.
Partition 1
Pre-
eDirectory
8.8
Partition 2
eDirectory
8.8
eDirectory
8.8
eDirectory
8.8
ER
enabled
ER cannot
be enabled