Novell EDIRECTORY 8.8 SP3, Administration Manual, Page: 220 / 634

220 Novell eDirectory 8.8 Administration Guide
n
ov
do
cx (e
n)
11
Ju
ly 20
08
transfer the
/etc/opt/novell/eDirectory/conf/nds.conf
file to the target
server and update all the references to the source server in the file with the target server
name.
1e Restart eDirectory on the source server.
If eDirectory is restarted on the source server before the files are copied, this clone is
invalid. The new NCP Server object must then be deleted and the clone must be recreated.
2 Move the cloned DIB fileset onto the target server's DIB directory.
3
Install eDirectory and start the server on the target server, with the DIB directory containing the
cloned DIB fileset.
Ensure that master replica of the new target Server object is running eDirectory and is
available. When eDirectory initializes on the target server, it communicates with the master
replica where the final naming of the target server is resolved.
4 To complete the eDirectory configuration, see “Completing the eDirectory Configuration” on
page 220 .
Completing the eDirectory Configuration
Š “SDIKEY” on page 220
Š
“Configuring SAS, LDAP, and SNMP Services” on page 220
SDIKEY
1
Bring down eDirectory on the target server.
2 Copy the
NICISDI.KEY
file from the appropriate directory on the source server to the target
server.
3 Start eDirectory on the target server.
Configuring SAS, LDAP, and SNMP Services
All the services listed below can be configured in one operation by entering the following command
at the command line:
ndsconfig upgrade [-a admin FDN ]
IMPORTANT: The above command is applicable to Linux, Solaris, and AIX only.
For configuring the services individually, refer the following tables:
Platform Directory
NetWare
sys:\system\nici\NICISDI.KEY
Windows
C:\WINNT\System32\Novell\NICI\NICISDI.KEY
Linux, Solaris, and AIX
/var/novell/nici/0/nicisdi.key