Novell EDIRECTORY 8.8 SP1, Installation Manual

Page: 91 / 150

Installing or Upgrading Novell eDirectory on AIX 91
no
vd
ocx
(e
n)
6 Ap
ril 20
07
export LD_LIBRARY_PATH=/opt/novell/eDirectory/lib:/opt/
novell/eDirectory/lib/nds-modules:/opt/novell/lib:/opt/
novell/lib:/opt/novell/eDirectory/lib:$LD_LIBRARY_PATH
export LIBPATH=/opt/novell/eDirectory/lib:/opt/novell/
eDirectory/lib/nds-modules:/opt/novell/lib:/opt/novell/lib:/
opt/novell/eDirectory/lib:$LIBPATH
export PATH=/opt/novell/eDirectory/bin:/opt/novell/
eDirectory/sbin:$PATH
export MANPATH=/opt/novell/man:/opt/novell/eDirectory/
man:$MANPATH
export TEXTDOMAINDIR=/opt/novell/eDirectory/share/
locale:$TEXTDOMAINDIR
Š
Use the ndspath script to export the environment variables
If you do not want to export the paths manually, you can use the
/opt/novell/
eDirectory/bin/ndspath
script as follows:
Š
Prefix the ndspath script to the utility and run the utility you want as follows:
/opt/novell/eDirectory/bin/ndspath
utility_name_with_parameters
Š
Export the paths in the current shell as follows:
. /opt/novell/eDirectory/bin/ndspath
After entering the above command, run the utilities as you would normally do.
Š
Call the script in your profile, bashrc, or similar scripts. Therefore, whenever you log
in or open a new shell, you can start using the utilities directly.
5.6.5 Nonroot User Installing eDirectory 8.8
A nonroot user can install eDirectory 8.8 using the tarball.
Prerequisites
‰ Ensure that NICI is installed.
For information on installing NICI, refer to Section 5.6.3, “Installing NICI,” on page 87 .
‰ If you want to use SLP and SNMP, ensure that they are installed by the root user.
‰
Write rights to the directory where you want to install eDirectory.
If you are a nonadministrator user, ensure that you have the appropriate rights as mentioned in
the
Section 5.2, “Prerequisites,” on page 83 section.
Installing eDirectory
1 Go to the directory where you want to install eDirectory.
2 Untar the tar file as follows:
tar xvfp / tar_file_name
3 Export the paths as follows:
Š Manually export the environment variables