manualshive.com logo in svg

Novell EDIRECTORY 8.8 SP1, Installation Manual

Share
Download
Novell EDIRECTORY 8.8 SP1 Installation Manual Download Page 118

118

Novell eDirectory 8.8 Installation Guide

no

vd

ocx 

(e

n)

  

6 Ap
ril 20

07

-d

Dry run. Upgrade will be performed on a copy of the actual database. This option is 
more useful in NetWare where the database location can not be changed. The last 
argument – database path - of this utility will not have any effect on NetWare platforms.  

IMPORTANT: 

ds.nlm should be unloaded before loading dsdibup.nlm.

This option can be used if the administrator wants to know if the upgrade is going to be 
successful and also to estimate the time required to upgrade the database. It is 
recommended to take a copy of the DIB.

NOTE: 

eDirectory  service should be unloaded or stopped before taking a copy of the 

database. ndsdibupg utility can be run on the copied database to estimate the 
downtime required for the actual upgrade. During this time, eDirectory service can be 
loaded or restarted.

-v

Verbosity of the messages. The default value is 3 where all messages are logged. It is 
recommended to always leave the verbosity level to its default value.

-l

Provide a log file name where messages are logged during upgrade. The log file will 
indicate the time the upgrade started and the end time.  Given below is a snapshot of 
log file.

Option

Description

Summary of Contents for EDIRECTORY 8.8 SP1























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands