Novell EDIRECTORY 8.8 SP1, Installation Manual

Page: 63 / 150

Installing or Upgrading Novell eDirectory on Linux 63
no
vd
ocx
(e
n)
6 Ap
ril 20
07
The following fields are displayed for every instance:
Š
Configuration file path
Š
Server FDN and port
Š
Status (whether the instance is active or inactive)
NOTE: This utility lists all the instances configured for a single binary.
Refer to Figure 3-1 on page 63 for more information.
Creating an Instance through ndsmanage
To create a new instance through ndsmanage:
1 Enter the following command:
ndsmanage
If you have two instances configured, the following screen is displayed:
Figure 3-1
ndsmanage Utility Output Screen
2 Enter c to create a new instance.
You can either create a new tree or add a server to an existing tree. Follow the instructions on
the screen to create a new instance.
Performing Operations for a Specific Instance
You can perform the following operations for every instance:
Š “Starting a Specific Instance” on page 63
Š
“Stopping a Specific Instance” on page 64
Š
“Deconfiguring an Instance” on page 64
Other than the ones listed above, you can also run ndstrace for a selected instance.
Starting a Specific Instance
To start an instance configured by you, do the following:
1 Enter the following:
ndsmanage
2 Select the instance you want to start.