24
GLoBAL MEnU BUtton
The Global Menu is a set of options that affect the operation of the whole unit.
Options Sub Menu
Memory Protect - MemProt
Ensure this is set to ‘OFF’ if you want to overwrite your Templates. To prevent accidental overwriting of templates,
set this to ON. Global settings can be saved regardless of whether this is set to ‘ON’ or ‘OFF’.
Pot Pick-Up - Pick-Up
This sets the pot and slider response for all controls in all templates: The settings are ON or OFF, they work in the same
way as described on page 22.
Note: Individual controls can have their own Pick-Up settings. The Global setting will be ignored unless the individual control
is set to GLOBAL.
Display Timeout - DispTime
This sets the length of time that temporarily displayed information remains on the ZeRO SL MkII displays. Set the value
between 0 and 1260ms, or to ‘PERM’ (permanent).
Keep Values - KeepVals
This applies to Advanced Mode (non-Automap) templates.
If this is set to ‘ON’ then the ZeRO SL MkII will automatically store the value of each control when you switch away from the
currently selected template and restore those values when you select that template again. If this is set to ‘OFF’ then the
ZeRO SL MkII will only store control values when you manually
write
the template.
Touch Select - Touch Sel
When set to on, the ZeRO SL MkII’s touch sensitivity is active for Automap and all Advanced Templates. Setting this to OFF
means that touching a control no longer displays that control’s row on the LCD screen.
Transport - Transprt
When the transport button is active, the transport buttons (re-wind, fast-forward, stop, play, loop, and record) can be set
to have independent settings for each template. For example, some MIDI hardware may respond to MMC (which is the
default for most Advanced Templates), but other hardware may respond to different MIDI messages for transport control.
When set to TEMPLATE, each template can have independent transport settings.
When set to GLOBAL, no matter what template you are using, the transport settings will be the same.
As default, the Global Transport settings are set to communicate with the Automap Server (which then sends Rewire
transport messages to software), however Global Transport settings can be edited. When this option is set to GLOBAL,
editing the transport control parameters from any template will affect the transport controls globally.
Control Pedal Polarity - CnPedal
The control pedal polarity can be changed here. The options are NormCLSD, NormOPN and Auto.If your control
pedal is behaving the wrong way (i.e. a press on the pedal results in ‘open’ rather than ‘closed’) then set the option to
NormCLSD. If your pedal works correctly then set the option to NormOPN. Setting the option to AUTO means that the SL
scans the control pedal port on boot up. It will presume that the pedal is in the Open position, and set the control pedal
polarity accordingly.
