Foreword
SMART-MR10 User Manual Rev 0B
17
•
The letter H in the
Offset
columns of the commands and logs tables represents the
header length for that command or log. Refer to the
OEMV Family Firmware
Reference Manual
for ASCII and binary header details.
•
The number following 0x is a hexadecimal number.
•
Command descriptions’ brackets, [ ], represent the optionality of parameters.
•
In tables where values are missing, they are assumed to be reserved for future use.
•
Status words are output as hexadecimal numbers and must be converted to binary
format (and in some cases then also to decimal). For an example of this type of
conversion, please refer to the RANGE log in the
OEMV Family Firmware
Reference Manual.
Conversions and their binary or decimal results are always read from right to left.
For a complete list of hexadecimal, binary and decimal equivalents, please refer to
the
Unit Conversion
section of the
GNSS Reference Book
available on our Web site
at
http://www.novatel.com/support/docupdates.htm
This symbol indicates an important statement, caution or warning.
Section B.1, Syntax Conventions
for additional conventions.
