Novatel SMART-MR10-GENERIC, User Manual

Page: 78 / 104

78 SMART-MR10 User Manual Rev 0B
Appendix B Commands
B.4 FRESET Clear Selected Data from NVM and Reset
This command is extended to include SMART-MR10 features. An additional target field, userdata
(value = 10), resets only the SMART-MR10 user data NVM, thereby resetting all parameters indicated
in this document as “Stored in NVM” to factory defaults. Issuing the FRESET command with the
“target” field set to
standard , resets the userdata NVM as well as OEMV parameters as indicated in
the OEMV Family Firmware Reference Manual .
If you issue the FRESET command without any parameters, it is the same as issuing a FRESET
STANDARD command.
Table 15: FRESET Target
Field
Field
Type ASCII
Value Binary
Value
Description
Binary
Format
Binary
Bytes
Binary
Offset
1 FRESET
header - - This field contains the
command name or the
message header
depending on whether
the command is
abbreviated ASCII,
ASCII or binary,
respectively. - H 0
2 target See Table 15 Data to be reset by the
receiver Enum 4 H
Binary ASCII Description
0 STANDARD Resets commands, ephemeris, and almanac (default). Also resets
all L-band related data except for subscription information.
1 COMMAND Resets the stored commands (saved configuration)
2 GPSALMANAC Resets the stored GPS almanac
3 GPSEPHEM Resets the stored GPS ephemeris
4 GLOEPHEM Resets the stored GLONASS ephemeris
5 MODEL Resets the currently selected model
10 USERDATA Reset SMART-MR10-only commands
11 CLKCALIBRATION Resets the parameters entered using the CLOCKCALIBRATE
20 SBASALMANAC Resets the stored SBAS almanac
21 LAST_POSITION Resets the position using the last stored position
31 GLOALMANAC Resets the stored GLONASS almanac