23
Connected Devices
The
Connected Devices
page lists all Wi-Fi enabled devices currently connected to your MiFi M100
network. For each connected device, it shows:
•
Name
— Normally, this is the hostname of the connected device, as set on the connected
device. If you have used this interface to assign a name to a connected device, the assigned
name displays in place of the hostname. In rare cases, the hostname may be unavailable. You
can use the
Edit
option to change the name of any connected device.
•
Type
— The first column displays an icon to indicate the type of connected device. You
can use the
Edit
option to set or change the type. If the type has not been set, no icon is
displayed. Once you set the device type, an appropriate icon is displayed.
•
IP Address
— The IP address of the connected device.
•
MAC Address
— The MAC Address is a unique network identifier for this connected device.
•
Link-Local
— If the connected device supports IPv6, the Link-Local IPv6 address is displayed.
•
Edit
— Allows you to edit a connected device type or name.
•
Block
— Allows you to disconnect a connected device and block it from further connection.
All blocked devices are listed below connected devices. To unblock a device, select
Unblock
.
To change the maximum number of devices that can be connected to your MiFi M100 at the same
time, select
Change Max Connections
. This takes you to the Wi-Fi Hotspot page in the Settings
section, where you can set maximum connections and other options.
Connected Devices Page
