Novanta NDS ScaleOR, User Manual

Page: 12 / 40

4
3
Notes:
Power input for use with the op onal 12VDC power supply only. The HDBaseT (PoE) port is the
recommended power source for the ScaleOR HDBaseT.
Input module, DVI-D module shown, all input modules are shown on page 9.
The ND-OS connector allows the ScaleOR to be controlled remotely via serial commands. It is also used to
install BIOS upgrades.
HDBaseT and DVI video outputs. The HDBaseT port is Power over Ethernet (PoE) compa ble and should be
used to power the ScaleOR HDBaseT.
NOTE: The PoE port supplies the ScaleOR HDBT power, as the default power source. The ScaleOR HDBT
can be powered using the wall adapter, as an op onal power source.
The ScaleOR with fixed DVI and HDBaseT output connectors is shown below.