Novanta NDS ScaleOR, User Manual

Page: 10 / 40

Installa on:
ScaleOR units may be stacked on a equipment carrier, a surgical cart or mounted in a standard 19” rack.
Ensure that the air vents are not blocked.
Power Supply:
ScaleOR with DVI and SDI connectors — The provided power supply, Ault and SL Power Electronic Corp Model:
MENB1030A1200C02 12VDC, includes 4 interchangeable wall plug adapters. An alternate power supply
GTM91120-3024-T3A, 24VDC. Drawings of the power supply, its adapters, and adapter installa on informa on
are on page 8.
ScaleOR with DVI and HDBaseT (HDBT) connectors — The HDBaseT connector is Power over Ethernet (PoE)
compa ble and can be used to power the ScaleOR. An op onal power supply is available.
Compa ble Displays:
1. HD displays with a DVI input.
2. HD displays with HD-SDI or 3G-SDI input.
3. HD displays with HDBaseT input.
4. HD displays with Fiber Op c input. Note : The ScaleOR Fiber Op c output is an op onal feature.
Control Op ons:
The ScaleOR may be controlled from:
1. The keypad on the front of the ScaleOR. Using the keypad requires that the ScaleOR be connected to a
display.
2. A PC via the ND-OS port. See Serial Port Setup and Test on page 16.
The NDS Unified Serial Commands (P/N 60A0156) document contains a complete set of serial commands for the
ScaleOR . Please contact your NDS sales representa ve for details.
General Information
The ScaleOR accepts 1 of following 4 input modules:
DVI-D
SDI
VGA
S-Video / Composite
The ScaleOR is has two op ons of fixed output connectors:
DVI and SDI
DVI and HDBaseT (HDBT)
The drawings on pages 3 and 4 show the loca ons of the two versions of fixed output connectors and the input
module.
The output mode (resolu on) may be selected using the DIP switches located on the bo om of the
ScaleOR (see
Output Mode Switch Se ngs table on page 5).
ScaleOR Overview
2