Novanta NDS ScaleOR, User Manual

Page: 20 / 40

5
Startup
Connect one of the ScaleOR outputs to a compa ble monitor. Connect a video source to the ScaleOR input.
Press the power bu on located on the front panel of the ScaleOR . The illuminated blue ring on the power
bu on flashes for 15 seconds then, when a video signal is detected, becomes steady. If a video signal is not
detected the ring con nues flashing.
The NDS logo is displayed on the monitor un l the ScaleOR ini aliza on is complete. At which me the
illuminated ring stops flashing, if a video signal is detected, and becomes steady blue. At this me an image
of the video signal connected to the ScaleOR input is displayed on the monitor.
If the ScaleOR has been turned on for more than 15 seconds and a video signal is not detected the blue ring
is will flash at the rate of 1 flash per second.
ScaleOR
12