Flexpoint™ HS-1R User’s Manual
Page 34
RFID Presentation Time Out
When you place the HS-1R in a presentation cradle, it will automatically switch to Barcode
Presentation mode. By pressing the trigger button, you can toggle between Barcode and RFID
Presentation mode. By default, this is an infinite duration, but you can also have the HS-1R
switch back to barcode presentation mode from RFID mode after a specific time.
Use the command
PSTTIME
x
(where ‘x’ is a value between 0 and 3600000)
, to set the time
between 0 (no time out) and 3600000 (=1 hour) in steps of 1ms, or by building a menu command
barcode. Please contact JADAK if assistance is needed. Default time = 0 / Infinite Time Out.
Setting examples:
* Infinite Time Out
Presentation Time Out 5.0 seconds
Presentation Time Out 10 seconds
Presentation Time Out 30 seconds
