Flexpoint™ HS-1R User’s Manual
Page 28
6 - RFID
RFID Overview
Besides being able to scan 1D and 2D barcodes, the HS-1R can also read (and write to) RFID
tags, using HF RFID technology at 13.56MHz. The HS-1R is capable of reading various tag
types’ UID portion as well as reading and writing tag data for ISO 15693 tags.
RFID Mode On/Off
It’s possible to enable or disable the RFID part of the HS-1R.
Scan one of the codes below to enable or disable RFID Scanning. Default = Enabled.
* RFID Enabled
RFID Disabled
RFID Reading
When presenting a RFID tag to the HS-1R, depending on the settings for PRERENA, RFIDMIN
and RFIDMAX, it can automatically present the data in the following format:
[
Prefix
] [Tag UID],[Block data],[
nn
],[
L
],[Tag Type],
where nn=number of blocks, and L=Length of data.
RFID Start/Stop Read Block Number
These commands define at which block numbers the auto-RFID reading starts and stops.
Use these commands in combination with a value, which represents the block’s number or
by building a menu barcode.
If you want only to output the first four blocks, set
RFIDMIN
to 0 and
RFIDMAX
to 3.
By default the first 8 blocks are outputted (i.e.
RFIDMIN 0
and
RFIDMAX 7
).
Please contact JADAK if assistance is needed.
