Flexpoint™ HS-1R User’s Manual
Page 15
Interface Settings
Connecting the HS-1R with USB Port
Note:
These instructions are for use with the USB (JADAK CBL-0144) cable.
1. If you are using USB Serial Communication Port Emulation interface, you must first load the
driver for that interface onto your computer.
The driver is available from your JADAK technical support contact.
No driver is required when using the USB HID Keyboard interface.
2. Turn off power to the terminal/computer.
3. Connect the appropriate interface cable to the HS-1R hand scanner.
Note:
For the imager to work properly, you must have the correct cable for your type of
terminal/computer.
3. Plug the USB-A connector into a free USB port on your computer.
4. Once the imager has been fully connected, power up the computer.
