background image

WEATHER STATION

Model 100-1950

1.0

GENERAL DESCRIPTION

NovaLynx Corporation provides a weather station, Model 100 -1950, that displays Wind
Speed, Wind Direction, Temperature, Relative Humidity, and Barometric Pressure.  The
weather displays are analog dials that are enclosed in an attractive wood frame suitable
for hanging on a wall. 

1.1

Wind Speed and Direction

The Wind Speed and Wind Direction indicators are  rectangular electrical meters with
needles that deflect with the changing winds.  A combination anemometer and vane wind
sensor is mounted outdoors at an elevation that will give good exposure to the local winds. 
The wind sensor is connected to a signal conditioning circuit board located behind the
meter case.  The anemometer circuit is self generating while the vane circuit requires an
external power supply.   

1.2

Temperature

The  other  meters  are  mechanical  devices.    The  temperature  dial  is  connected  to  a
remotely located temperature sensor through a capillary tube.  The temperature measured
at the end of the tube is indicated by the meter.  The remote temperature sensor may be
located to measure either indoor or outdoor air temperatures.

1.3

Relative Humidity

The relative humidity dial is a self-contained meter with the sensing element housed inside
the meter.  As the relative humidity changes, the meter will respond and its pointer will
indicate the new value. 

1.4

Barometric Pressure

Similarly, the barometer dial contains the sensing element and indicates changes in the
atmospheric  pressure.    A  moveable  set-point  needle  allows  the  operator  to  determine
whether the barometer has risen or fallen since the last reading has been taken.

1

Summary of Contents for 100-1950











Reviews: