background image

9

 PIT WIZARD INSTRUCTION MANUAL

• BRAKE PWM FREQUENCY

Measured in Hertz (Hz).

Frequency at which the duty cycle information is being sent

from speed control to motor for braking.

Brake PWM Frequency controls deceleration characteristics of

your vehicle with respect to trigger movement in the Full Brake
direction (Figure 5). Changing Brake PWM Frequency allows
you to change the manner in which the vehicle responds to
brake trigger input.

Increasing the Brake PWM Frequency

 will require more initial

trigger movement to obtain a given amount of braking. Light
vehicles brake more controllably under initial braking / Heavy
vehicles brake less reactively.

Decreasing the Brake PWM Frequency

 will require less initial

trigger movement to obtain a given amount of braking. Light
vehicles are harder to control under initial braking (possibly
locking up the wheels) / Heavier vehicle are more reactive to
initial braking efforts.

ADJUSTABLE PARAMETERS

 (CONT.)

Figure 5:

  Graphical location of area affected by Brake PWM Frequency.

DEADBAND

T R I G G E R         P O S I T I O N

N e u t r a l

F u l l
B r a k e

F u l l

T h r o t t l e

1 0

1 0

2 0

5 0

1 0 0

2 0

5 0

1 0 0

BRAKE PWM
FREQUENCY

% FULL DRIVE

% FULL BRAKE

Summary of Contents for PIT WIZARD



































Reviews: