Important Notes:
•
Change the remote control batteries once the indicator LED gets weak
•
The remote control uses 2 x 1.5V AAA batteries
•
To change the batteries open up the battery compartment cover and place
the batteries according to the diagram in the battery compartment
•
The wire on remote is signal antenna. Broke the wire will cause remote not
function.
•
The maximum range of the remote control varies between 80-120 yards,
depending on the battery charge, obstacles, atmospheric conditions, power
lines and topography of the course.
•
It is strongly recommended to operate the caddy at a maximum rang
within 50 yards in order to prevent the loss of control of the caddy!
3.3. Additional Function
3.3.1. Free-wheeling Mode
:
The caddy can be operated without power as a regular push cart. In order to
active the free-
wheeling mode turn main power “OFF”. The cad
dy can be
pushed manually without resistance now.
3.3.2. Tracking Adjustment:
You can adjust the tracking of your caddy by loosing the axle and the
adjustment bar on the right side of the front wheel and shifting the axle
accordingly.
3.3.3. Remote Control Connection:
Turn caddy main power on, then press and hold any directional button on the
remote control for about 10 seconds. Your caddy should now be “connected”
to the remote control. This is used to align the caddy frequency with an
out-of-tune or replacement remote control or new control box.
10
