8. Unpack remote control and install batteries as indicated in the diagram in the
receiver compartment of the unit. Now you are ready to learn and understand
the function of the manual and remote controls.
9. Installation of seat (Optional)
9.1 Attach and fasten holding bar to pre-drilled holes in frame using screw
bolt (included)
9.2 Attach stand to seat bottom using the four small screws. Attach in such manner
that the seat points parallel to the driving direction of the caddy with the opening
to the outside, once you slid it into the holding bar.
9.3 Slide seat stand into holding bar by pulling on the foot.
6
