Nouveau Contour iQ, Manual

Page: 7 / 36

7 EN NC iQ
Symbols used in this manual
SYMBOL MEANING
E
Action request
O
List item
- List sub-item
2 IMPORTANT SAFETY NOTES
2.1 General safety notes
E
Read these operating instructions carefully and completely.
E
Store these instructions and keep them available at all times for all personnel using, clean-
ing, disinfecting, storing or transporting the device.
E
If passing on the device to other personnel, make sure these instructions always accom-
pany the device.
E
Follow the safety regulations for micro pigmentation in your country. Make sure to keep
your workstation clean and hygienic and ensure adequate lighting.
E
Utilise the device, its accessories and all connection cables only in technically perfect
condition.
E
Only use original NOUVEAU CONTOUR needle modules, accessories and spare parts.
2.2 Product-specific safety instructions
E
Never modify the device, the needle modules or other accessories.
E
Children must be supervised not to play with the appliance.
E
Prevent liquids from entering into the device interior, the handpiece, the foot-operated
switch or the power supply.
E
Place the appliance in such a way that the recommended safety distance from possible
sources of interference is always observed. Information about recommended safety dis-
tances may be found in chapter 11.2.3 "Recommended safety distances for portable and
mobile RF communications equipment“ on page 32. Avoid possible sources of inter-
ference by not operating any portable or mobile radio devices in the vicinity of the device.
E
Protect the handpiece and the connection cable with a hygiene sheath to prevent im-
purities from bodily fluids or substances contaminated by bodily fluids (see chapter 5.6
"Inserting or replacing the needle module“ on page 21).
E
When you are not using the device, disconnect it from the power supply and store the
handpiece on the handpiece rest so that it cannot roll away and fall down.
E
Observe the technical data as stated in these operating instructions and follow the operat-
ing, transport and storage specifications (see chapter 8 "Transport and Storage Require-
ments“ on page 29).
E
Should the product display visible damage, not operate as usual or if liquids may have
entered the device or handpiece, take it to an authorised dealer for inspection.