25
EN
NC iQ
E
The
( )
button starts the treatment process and stays illuminated during the entire pro-
cedure.
E
In addition, the Play icon will display on the screen.
E
Frequencies can be changed at any time during the procedure.
E
Selecting a preset mode during the procedure is not possible.
E
The procedure is ended by pressing the
( )
button again.
6.2.2 Working in the Preset mode
E
Should you select a preset, it will be displayed as a graphic. A default working frequency
is displayed for this mode.
E
The
( )
button will start the selected application. You are able to change the frequency
during this procedure too, while remaining in the preset mode.
E
If you press the same Preset button 2x consecutively, you will exit the preset mode and
the Preset symbol will disappear. The last frequency setting will remain displayed and can
be changed at any time.
E
If the device is inactive for 30 minutes, it prepares to go into sleep mode.
E
You will see the message “automatic shut down” for approx. 1 minute.
6.3 Selecting the projection position of the needle
CAUTION
Risk of injury if needle protrudes too far
A far-protruding needle position makes a deeper puncture possible. If needle protrusion
and puncture depth are too large, the risk of side effects such as haematoma, erythema, or
oedema will increase, (see chapter 2.5 "Side effects“ on page 10).
E
Select the needle protrusion depending on your customer’s skin texture in the area of
the procedure.
E
Switch the control unit into operating mode.
E
Adjust the needle position by twisting the flexible part of the handpiece (1).
Fig. 8: Adjusting the needle projection
Summary of Contents for iQ
