MD 11
MD 11, V2.0, Operating Instructions, REF 31665, V22/17
13
EN
7.4
Adjusting the programs
The values for operation settings depend on the connected handpiece/contra angle as well as the task to be
performed.
7.4.1
Step 1:
Selecting the handpiece/contra angle to be used
The selected handpiece/contra angle must comply with the factual used handpiece/contra angle.
Press the “
HP”
key to select the handpiece/contra angle
Press the
“PR”
key to choose between program 1 to 6. The factory setting is adjusted to 4 usable
programmes.
In the configuration menu the number of available programs can be set from 2 to 6 (refer to “7.8
configuration menu/number of programs”).
* The limitation of the AS-range (Automatic Stopper) can be adjusted in the configuration menu.
Handpieces or contra angles that don’t belong to one’s own assortment can be deactivated in the Configuration
Menu (refer to “7.8 configuration menu/handpiece existing”). That makes finding the right handpiece in the
handpiece list easier, because the list of available handpieces becomes shorter.
Table of possible handpiece/contra angles
Name of the
handpieces/contra angles
with transmission ratio
Display
Speed
min. rpm
Speed
max. rpm
Torque
min. Ncm
Torque
max. Ncm
AS-range
(Factory def.)
rpm
Limit
AS-range
rpm (*)
Drill handpiece, 1:1
1 : 1
300
40,000
1
6
-
–
Drill contra angle, 16:1
16 : 1
20
2400
5
27
up to 20
20 – 45 *
Drill contra angle, 20:1
20 : 1
15
1700
10
70
up to 20
15 – 45 *
Drill contra angle, 32:1
32 : 1
10
1000
10
55
up to 20
10 – 45 *
Drill contra angle, 70:1
70 : 1
5
600
10
55
up to 20
5 – 45 *
