15
7 Faults: causes and cures
7.1
Fault-finding procedures
Should any fault occur during the use of the machine, turn it off, and isolate it from the electrical
supply. Any works dealing with the electrical system or supply of the machine can only be carried
out by a qualified electrician.
7.2
Trouble-shooting guide
Trouble
Possible source
Resolution
No electricity
Check the electrical supply (fuse for
example)
Connection cable section too small
Change connection cable
Defective connection cable
Change connection cable
Defective switch
CAUTION : can only be solved by
qualified electrician
Motor is not running
Defective motor
Change motor or contact motor
manufacturer
No water on the blade
Not enough water in the pan
Refill the water pan
7.3 Customer service
When ordering spare parts, please mention:
•
The serial number (7 digits).
•
The code of the part.
•
The exact denomination.
•
The number of parts required.
•
The delivery address.
•
Please indicate clearly the means of transportation required such as "express" or "by air".
Without specific instructions, we will forward the parts through the means which seem
appropriate to us --- but which is not always the quickest way.
Clear instructions will avoid problems and faulty deliveries.
If not sure, please send us the defective part.
In the case of a warranty claim, the part must always be returned for evaluation.
Spare parts for the motor can be ordered with the manufacturer of the motor or with their dealer,
which is often quicker and cheaper.
This machine has been manufactured by Saint-Gobain Abrasives S.A.
190, Bd. J.F. Kennedy
L- 4930 BASCHARAGE
Grand-Duché de Luxembourg.
Tel. : 00352-50401-1
Fax : 00352- 50 16 33
http://www.construction.norton.eu
e-mail: [email protected]
