Norton TR 230 GL, Operating Instructions And Spare Parts List

Page: 14 / 112

14
•
Put in place side extension
Insert both pined shafts
Rotate both shafts by 90° to lock side extension
5.3 Cutting with an angle
You can cut from 0º to 45º by tilting the head rail. For this purpose:
•
Loosen the two knobs maintaining the head rail to tilt the head to the desired angle.
•
Retighten the two knobs.
5.4 General advice for the cutting
•
Only materials with max. dimensions of 1200x800x20mm for GL (860X800X20mm for GS) and
max. weight of 15kg can be cut with the TR 230.
•
Before commencing work make sure tools are firmly seated!
•
Select the right tools as recommended by the manufacturer depending on the material to be
worked, the working procedure (dry or wet cut) to be carried out and the required efficiency.
•
Make sure the water pan contains enough water.