Norton TR 230 GL, Operating Instructions And Spare Parts List

Page: 22 / 112

22
(*): S = Spare part, W = Wear part
Wear parts are worn out through normal use of the machine. The wear period depends a lot on the
intensity of use of the machine. Wear parts must be serviced, used and eventually changed
following the indications of the manufacturer. Any wear due to normal use of the machine will not be
considered as a case of warranty. Genuine CLIPPER replacement parts should always be used.
POS. PART NUMBER DESCRIPTION TYPE (*) REMARKS
121 RULER A S
122 M6 BIG WASHER S
123 ANGLE PLATE S
124 ANGLE RULER PARTS S
125 M5 BLOCKING RING S
126 SLIDING MATS S
127 KNOBS A S
128 POWER CORD & PLUG S
129 KNOBS B S
130 PARALLE FENCE FRAME S
131 M6 BLOCKING RING S
132 PULLING BOARD S
133 PARALLE FENCE S
134 LOCKING KNOBS S
135 CONNECTING SPINDLES S
136 LOCKING SCREWS S
137 BACK LEGS PARTS S
138 SCREWS A S
139 SUPPORTING FRAME PARTS S
140 M6X50 SCREWS S
141 BIG WASHERS S
142 CONNECTING PARTS S
143 FRONT LEGS PARTS S
144 SCREW B S
145 M5 WASHERS S
146 M5 NUTS S
147 310365205 SWITCH ASSEMBLY ONLY W
148 310365216 SWITCH CASING S
149 310365218 MATERIAL THRUST S
150 310365220 LONGITUDINAL CUTTING GUIDE S
151 310365222 ANGULAR CUTTING GUIDE S
152 310365223 SIDE EXTENSION S
310365224 FOLDABLE LEGS TR 230 GL S
153
310365226 FOLDABLE LEGS TR 230 GL S