Norton TR 230 GL, Operating Instructions And Spare Parts List

Page: 15 / 112

15
6 Maintenance and servicing
To ensure a long-term quality from the cutting with the TR 230, please follow the maintenance plan
below:
Before starting work During tool
change
End of each day or more often if required During a failure After a damage
Visual control (general
aspect, water tightness) Whole machine
Clean
Flange and blade fixing
devices Clean
Motor cooling fans Clean
Water pan Clean
Motor housing Clean
Reachable nuts and screws Tighten up
Maintenance of the machine
Always perform the maintenance of the machine with the machine isolated from the electrical
supply.
Lubrication
The TR 230 uses life-lubricated bearings. Therefore, you don’t need to lubricate the machine at all.
Cleaning of the machine
Your machine will last longer if you clean it thoroughly after each day of work, especially water
pump, water pan, motor and blade flanges.