Norton C1320P, Owner'S Manual

Page: 8 / 44

8
C. C1320P Concrete Saw Specifications
Dimensions/Weight
C1320P
Length (Transport)
56 inch (1142 mm)
Width
26 inch (660 mm)
Height
40 inch (1016 mm)
Weights 310 (141kg)
Engine
Engine Mfg.
Honda
Model GX390
Spec No. GX390K1QXC9
Engine Type Single Cylinder 4 Cycle
Horse Power*
13 hp (9.5kW) @ 3,600 rpm
Max Torque*
19.5 ft-lbs (26.5 Nm, 2.7 kgf-m) @ 2,500 rpm
Cooling System
Air
Oil Capacity
1.1 liter (1.16 US qt)
Fuel Capacity
6.5 liter (1.79 US gal)
Fuel Type
Unleaded Gasoline (86 pump octane)
Low Oil Sensor Yes
Air Filtration Four Stage Honda Cyclone
Start Type
Manual
Characteristics
Max Blade 20” (356 mm)
Depth of Cut
20” (356 mm)
7-1/2 inch (191 mm)
16” (305 mm)
5.50” (140 mm)
Arbor Bore 1 inch (25.4 mm)
Blade Shaft Locking Device Machined Into Flats Of Tight Collar
Blade Shaft Speed 2600 rpm,
Depth Control
Hand Wheel With Screw Feed
Depth Lock Standard
Number Of V-Belts 4
Blade Guard Type Pivoting All Steel Construction
Right or Left Side Cutting Standard
Lifting Bale Built In
Handle Bars Adjustable
Recessed Rear Wheels Standard
Front Wheel Wheel 5 x 2 x ¾ With Roller Bearing
Rear Wheel
Wheel 6 x 2 x ¾ With Roller Bearing
Water Hose Connector Standard Garden Hose With Flow Control Valve
Sound pressure
1
88 db(A)
Sound power
1
105 db(A)
* = Horse power and Torque ratings are Gross Horse power and are supplied by the engine manufacturer. Actual output of the engine will vary due to
many factors including operational speed of engine, environmental conditions, maintenance, fuel, and other variables. Saint-Gobain Abrasives, Inc.
makes NO claim to actual or gross horse power and torque ratings. 1) The sound measures have been made following pr EN 12638, Annex A;
2)“Floor sawing, grooving and milling machines – Safety “