11
7. Tighten the blade shaft nut (counter-clockwise for the Operator’s Right
Hand side and clockwise for the Operator’s Left hand side).
8. Insure that the Blade Guard is lowered and the Blade Guard Locking
pin is secure. Close Blade Guard Nose.
See
Blade Installed
diagram below.
Blade Installed
9. Reconnect the spark plug.
Observe rotation arrow on blade and do not exceed maximum
RPM stamped on blade.
NOTE:
Organic bonded blades (A) must have a blotter. The
blotter (B) must extend past the blade collar contact area as
shown.
Blades Use Only Norton Diamond Blades
Summary of Contents for C1320P
