Norton 70184603243, Operating Instructions Manual

Page: 9 / 36

VERS. 21.01.2019 CMV 1000 Verto_MAN_EN
9
1.2 Machine plate
Important data can be found on the following plate located on the machine:
1.3 Safety instructions for particular operating phases
Before starting the work

Before commencing work, make yourself familiar with the working environment at the place of
use. The working environment includes: obstacles in the area of work and manoeuvre, the
firmness of the floor, necessary protection at the site relating to public thoroughfares and the
availability of help in the event of accidents.

Check for correct mounting of the blade regularly.

Immediately remove damaged or badly worn blades, as they endanger the operator whilst rotating.

The material to be cut must be held securely in place on the cutting table allowing no movement
during cutting operation.

Always cut with the blade guard in position.

Only fit NORTON diamond blades to the machine! The use of other tools can damage the
machine!

Read the blades’ specifications carefully to choose the correct tool for your application.

Attention is drawn to the use of BS2092 safety goggles in conformity with specified Processes
No.8 of the Protection of Eyes Regulation 1974, Regulation 2(2) Part 1. and additional dusk mask
for dry cutting (only in exceptionally cases).
While the engine is running

Do not move the machine whilst the blade is running idle.

Always cut with the blade guard in position.
Machine model
Machine code
Weight
Year of production Maximum blade diameter
Bore
Diameter
Machine type Serial number
Blade speed Power
Safety standard