Norton 70184603243, Operating Instructions Manual

Page: 7 / 36

VERS. 21.01.2019 CMV 1000 Verto_MAN_EN
7
1 BASIC SAFETY INSTRUCTIONS
The CMV 1000 Verto is exclusively designed for the cutting of construction products mainly on
construction sites.
Uses other than the manufacturer's instructions shall be considered as contravening the regulations.
The manufacturer shall not be held responsible for any resulting damage. Any risk shall be borne
entirely by the user. Observing the operating instructions and compliance with inspection and
servicing requirements shall also be considered as included under use in accordance with the
regulations.
1.1 Symbols
Important warnings and pieces of advice are indicated on the machine using symbols. The following
symbols are used on the machine:
Before using the machine read the operating
instructions
Wear gloves
Wear ear protection Wear safety glasses
Never touch the diamond saw blade
during running!
Rotating direction of the saw blade
If, you do not use the machine
lock the feed mechanism in any time
Pay attention to the short manual
before switching ON the machine
Use only the integrated crane hook if you lift up the
machine with crane equipment!
For dry cutting (in exceptionally cases)
wear additional dust mask