ENGLISH
16
The heavy duty power switch in the power saw is
coupled with two safety features. A soft start
system (18) which prevents unintentional power
trips during start-up, and overloads. Source of
overload can be from user applying too much
cutting force or from the blade jamming. The
overloaded state has to be reset by releasing the
power trigger (a) and then depressing it once again
to return power to the motor. Before performing the
reset, the source of overload should be corrected.
A second safety device that runs in tandem with
this system is a traditional non fuse circuit breaker
(b). To reset this breaker the user must release the
power trigger and depress the circuit breaker
button located below the power cable. Now power
can be sent to the motor once again.
4.5 Electrical Safety System
16
18
9
Summary of Contents for CE414-350
Page 26: ...ENGLISH NOTES...
