Norton Clipper CE414-350, Owner'S Manual

Page: 15 / 27

ENGLISH 15
Testing functionality of power trigger

To test the power trigger, connect the machine to
the correct power supply, grasp the handle to
position your fingers next to the power trigger.
Using the index finger and push to disengage the
lock trigger (17), shown on the left. With the lock
disengaged, pull the power trigger up (9) and
then release. The motor should turn on and then
off when the trigger is released.

If the motor does not turn off or blade does not
stop spinning, have the switch assembly serviced
immediately by a certified technician. In the
mean time discontinue use of the power saw.

The power trigger lock should also be tested.
This time pull the power trigger only (9). If the
motor turns on then the lock trigger is damaged
and needs to be serviced. Have the switch
assembly serviced by a certified technician. In
the mean time discontinue use of the power saw.
4.4 Power Trigger Usage
9 17
3
5
2
7
4
16
9
13
8
10
15
12
17
18