Norton Clipper CE414-350, Owner'S Manual

Page: 12 / 27

ENGLISH 12
In addition to the safety provisions already listed, the following safety provisions also apply when
working with the motor device:

Secure the workplace against accidental access by third parties, e.g. with warning signs. Only
persons involved and wearing protective clothes must be present within 100’ (30 m) around the
working area.

Check the site of deployment for possible dangers.
– If spark created during cutting work must never be performed close to potentially explosive
gases of liquids, or easily flammable objects.
– No electrical lines must be placed in the area to be cut.
– Objects that may fall off or topple over during work must be secured or removed from the
working environment first.
– Prepare the workplace so that secure backing away is possible.

The work piece to be cut must be free of foreign bodies such as screws, nails or stones.

When working in residential areas, observe the noise protection provisions.

Work carefully, considerately and calmly and do not endanger any other persons.
– Ensure good vision and light conditions.
– Always remain within calling distance of other persons who may administer first aid in
emergencies.
– Put in working breaks in time.
– Be attentive towards possible danger sources and take the corresponding preventive
measures. Consider that use of hearing protection limits perception of sounds. Signal
sounds, calls, etc. that announce danger may also be missed.
– Observe tripping dangers and obstacles. Never work on unstable surfaces.
– Always hold on to the power tool with both hands and always ensure a safe and firm stance.
– Never cut standing on a ladder.
– Guide the power tool so that no body part is located in the extended swivel range of the cutting
disc.
– Only process the work piece to be cut with the cutting disc running; never touch the floor or
other objects with the cutting disc running.
– Do not use the power tool to lever off and shovel away objects.

Switch off the motor when the power tool starts to behave noticeably differently.

Danger of hearing damage!
3.7 During Work