10
Northstar 8000i 15" Monitor Installation Manual
Key
Function when NOT in OSD mode Function in OSD mode
A
Power
Press once to turn on. Hold down for three seconds to turn off.
If correctly wired using the Remote Power On feature this key also
controls the power status of the Northstar 8000i Black Box Processor
B Up
Arrow Press to step up through the
other video input source
options.
Press once to step up through the OSD
options.
C Down
Arrow
Press to show the current video
input source in the top left
corner of the screen.
Press again to step down
through the other video input
source options.
Press once to step down through the
OSD options.
D MENU
Press once to show the OSD
options.
Press to exit the OSD options.
E OK
Press to show the current video
input source in the top left
corner of the screen.
Press to select or accept changes to
the OSD options and exit the OSD
options.
F Left
Arrow Press once to decrease the
brightness one step or hold
down to change it rapidly.
Press once to change an OSD setting
(such as contrast) one step or hold
down to change the setting rapidly.
G Right
Arrow Press once to increase the
brightness one step or hold
down to change it rapidly.
Press once to change an OSD setting
(such as contrast) one step or hold
down to change the setting rapidly.
H
Infrared
Receiver
Not yet implemented
I Screen
1024 x 768 resolution touch
screen (XGA)
J
Finger
Guides
To guide fingers to the onscreen
controls when using the 8000i
software.
K
Mounting
Bezel
Clip-on bezel.
