24
Northstar 8000i 15" Monitor Installation Manual
USB Dash mount connector (NS004709)
Northstar 8000i Remote Key pad (NS004747)
Northstar 8000i DVD / CD player
C-Map Chart licence Key
Northstar 8000i USB Video Capture
12
Turn on the 15 inch Monitor
NOTE: The video input source connected at the rear of the 15" Monitor MUST match the
video input source that's specified in the 15" Monitor OSD Menus. If it doesn't match,
nothing is shown on the 15" Monitor.
For example, if you've connected an RGB1 video source, the video input source must also be
set to RGB1 in the OSD menus.
Recommended Method:
When the Black Box Processor and the 15" Monitor are wired using the remote power on
wires of the utility cable
1. Press the Power key on the 15" Monitor.
2. The Northstar Marine Monitor (OSD) screen may appear briefly, followed by the
Northstar 8000i screen.
Alternative Method:
When the Black Box Processor and the 15" Monitor are wired independently.
1. If the Black Box Processor is turned off, press the Power (ON/OFF) key at the rear.
2. The Power LED at the rear will glow red when the Black Box Processor is On.
3. Press the Power key on the 15" Monitor.
4. The Northstar Marine Monitor (OSD) screen may appear briefly, followed by the
Northstar 8000i screen.
