Page 16 — Using the Setup Menu
1200 Series Display, Rev. A2
OSD Settings
OSD Setting
allows you to place the Setup Menu wherever
you’d like it on the screen.
OSD Background
allows the Setup Menu to be either
Translucent
or
Opaque
. Many users find it easier to read in
the
Opaque
setting.
OSD Rotate
should always be set to
Normal
.
Freeze
. Northstar recommends not freezing the image.
Zoom
enables the zoom function on the image displayed. If
the image has been zoomed, then you can use the
Hori-
zontal Pan
and
Vertical Pan
to display the image.
Direct Access #1
should always be set to
Brightness
.
Direct Access #2
should always be set to
Contrast
.
Display Orientation
should always be set to
Normal
.
Calibrate RGB Gain
causes the display to re-calibrate its
colors automatically when displaying an image from the data
input. When displaying a new VGA data source for the first
time, this calibration helps set colors properly.
Load Factory Defaults
restores the factory default settings.
This is particularly useful if the display has been adjusted to
an undesirable state.
Exit Menu
Use this icon to exit the Setup Menu. Once at the
Exit icon, press
to exit the Setup Menu.
As a shortcut, you can also hold
down until
the Setup Menu disappears.
EXIT
VIDEO
MENU
