![background image](http://html1.mh-extra.com/html/northern/nth-led18/nth-led18_user-manual_1708289007.webp)
H-Position:
OSD horizontal position on the screen.
V-Position:
OSD vertical position on screen.
Duration:
OSD Menu timeout.
Halftone:
OSD Menu background opacity (allows viewing of the video behind the OSD menu).
Reset Defaults:
Restore monitor to factory default settings.
Version:
Displays firmware version number (not adjustable).
4. FUNCTION/GEOMETRY MENU
The HDMI, and BNC inputs share the FUNCTION menu. The VGA menu is labeled GEOMETRY
A. FUNCTION Menu
Press the MENU button to bring the menu on screen, and then up/down
buttons to move along the menu selections to highlight the FUNCTION
menu. Press MENU again to move between the left side main menu se-
lector into the window of menu choices and parameters.
Use the up & down buttons to move the yellow highlighted sub-menu se-
lection within the sub-menu. Pressing the right + & left - buttons will ad-
just the value of the highlighted item. Press the MENU button to exit the
sub-menu and return to the main menu selector.
To exit the menu system, press the SOURCE button twice.
Adjustments
DLC:
Dynamic Light Control On/Off Limits the brightness/contrast ratio extremes in on screen video.
B. GEOMETRY Menu (VGA Only)
Press the MENU button to bring the menu on screen, and then up/down buttons to
move along the menu selections to highlight the GEOMETRY menu. Press MENU again to move between the left side
main menu selector into the window of menu choices and parameters. Use the up & down buttons to move the yellow
highlighted sub-menu selection within the sub-menu. Pressing the right + & left - buttons will adjust the value of the high-
lighted item. Press the MENU button to exit the sub-menu and
return to the main menu selector. To exit the menu system, press
the SOURCE button twice.
Adjustments
H-Position:
Image Horizontal position
V-Position:
Image Vertical position
Clock:
Relative adjustment of horizontal scan rate
Phase:
Relative adjustment of synch
Auto Adjust:
Press
Vol+/Right
button to automatically adjust
settings to match input signal parameters
Summary of Contents for NTH-LED18
Page 11: ......