Network Bullet Camera·
Quick Operation Guide
20
20
1.
Loosen the lock screw-2.
2.
Adjust the tilting position of the camera. The adjusting range is
from 0 degrees to 90 degrees.
3.
Tighten the lock screw-2.
Rotation Adjustment
Steps:
1.
Loosen the lock screw-3.
2.
Rotate the rotation position to adjust the azimuth angle of the
image. The adjusting range is from 0 degrees to 360 degrees.
3.
Tighten the lock screw-3.
Figure 2-8
Lens Adjustment
2.4
Zoom and Focus Adjusting
Purpose:
You can use the zoom lever and focus lever to adjust the zoom value
and focus value.
Tilting
3
1
Rotation
Panning
2
Menu Button
20
Steps:
1.
Disassemble the camera. Refer to sec
ti
on 2.1.
2.
View the camera image using the monitor.
3.
Loosen the zoom lever and move the lever between T(Tele) and
W(Wide) to obtain the appropriate angle of view.
4.
Tighten the zoom lever.
5.
Loosen the focus lever and move the screw between F(Far) and
N(Near) to obtain the op
ti
mum focus.
6.
Tighten the focus lever.
7.
Assemble the camera. Refer to se
cti
on 2.1.
Figure 2-9
Zoom and Focus Adjustment
Zoom/Focus Lever
20
Installation & Quick Setup Guide
Installation & Quick Setup Guide
Summary of Contents for IP3VFB
Page 31: ...30 ...