Network Bullet Camera·
Quick Operation Guide
16
16
Figure 2-5
Secure the Camera
2.2.2
Wall Mounting with a Junction Box
Before you start:
For mounting with a junction box, you have to purchase a junction
box.
Network Bullet Camera·
Quick Operation Guide
17
17
Steps:
1.
Attach the drill template (supplied) to the wall where the camera
is to be mounted.
2.
Drill holes in the wall according to the number two holes of the
drill template. Refer to the Figure 2-4.
3.
If you need to route cables through the wall (or ceiling), cut a
cable hole according to the drill template. Skip this step, if you
want to route the cables on the surface of the ceiling.
4.
Secure the junction box to the wall with expansion screws.
5.
Route the cables of the camera.
6.
Connect the video output connector to the monitor. Connect the
power connector to the power supply.
7.
Adjust the image and focus. Please refer to the section 2.3 and 2.4
for more detailed information.
8.
Hook the camera to the junction box with the safety rope. Refer to
the Figure 2-6.
9.
Secure the camera to the junction box with screws.
16
Installation & Quick Setup Guide
Installation & Quick Setup Guide
Summary of Contents for IP3VFB
Page 31: ...30 ...
