Network Bullet Camera·
Quick Opera
ti
on Guide
5
•
Do not connect several devices to one power adapter as
adapter overload may cause over-hea
ti
ng or a
fi
re hazard.
•
Please make sure that the plug is
fi
rmly connected to the power
socket. When the product is mounted on wall or ceiling, the
device shall be
fi
rmly
fi
xed.
•
If smoke, odor or noise rise from the device, turn o
ff
the power
at once and unplug the power cable, and then please contact
a qualified service technician.
Cautions
•
Make sure the power supply voltage is correct before using the
camera.
•
Do not drop the camera or subject it to physical shock.
•
Do not touch sensor modules with
fi
ngers. If cleaning is
necessary, use clean cloth with a bit of ethanol and wipe it
gently. If the camera will not be used for an extended period,
please replace the lens cap to protect the sensor from dirt.
•
Do not aim the camera at the sun or extra bright places.
Blooming or smearing may occur otherwise (which is not a
malfunc
ti
on), and a
ff
ect the endurance of sensor at the same
ti
me.
•
The sensor may be burned out by a laser beam, so when any
laser equipment is in use, make sure that the surface of
sensor will not be exposed to the laser beam.
Installation & Quick Setup Guide
Summary of Contents for IP3VFB
Page 31: ...30 ...
