13
Figure 2-3
Assemble the Camera
For water-proof, please align the rota
ti
ng label on the front cover
with that on the camera when you rotate the front cover clockwise.
Refer to Figure 2-3(right).
2.2
Mounting
This camera is equipped with a bracket on the bo
tt
om. It can be
mounted to a wall directly and can also be mounted to a wall with a
junc
ti
on box or a gang box.
2.2.1
Wall Mounting
Steps:
1.
A
tt
ach the drill template (supplied) to the wall where the camera
is to be mounted.
1
Rota
ting
Label
Network Bullet Camera·
Quick Operation Guide
15
15
2.
Drill screw holes in the wall according to the number one holes of
the drill template. Refer to the Figure 2-4.
Figure 2-4
Drilling Holes in the Wall
3.
If you need to route cables through the wall (or ceiling), cut a
cable hole according to the drill template. Skip this step, if you
want to route the cables on the surface of the ceiling.
4.
Route the cables of the camera.
5.
Secure the camera to the wall (or ceiling) with expansion screws.
Refer to the Figure 2-5.
Ceiling Mounting
1
1
1
1
2
2
2
2
1:Screw Hole for
Bracket
2:Screw Hole for
Mounting Base
14
Installation & Quick Setup Guide
Installation & Quick Setup Guide
Summary of Contents for IP3VFB
Page 31: ...30 ...