42 Error Control II and Error Control II Jumper circuit packs
297-1001-536 Standard 01.03 August 1996
Table 5–1
Error control II circuit pack (A5) options – part number: NT6M65AA
Device type
(number)
Position/setting
Function
Setting
Factory On–site
Jumper
None Used
Strap
None Used
DIP
Switch
None Used
Rotary
Switch
None Used
Switch
None Used
Notes:
Note 1: See Figure 5–1.
Note 2: There are no customer–definable options on this circuit pack. Information is shown for reference only. Use this
data for verification during initial DPP system installation and/or circuit pack replacement to make sure the replacement
circuit pack is set up the same as the circuit pack being replaced.
End
