32 Memory expansion circuit pack
297-1001-536 Standard 01.03 August 1996
Table 4–1
Memory Expansion circuit pack (A3 and B3) options – part number: NT6M64AA
Device type
(number)
Position/setting
Function
Setting
Factory On–site
Jumper
A
Out
In
Out
In
B
In
In
Out
Out
C
Out
Out
In
In
Card 1
Card 2
Card 1 (64K only)
Card 2 (64K only)
B
(card 1 in
A3)
In
(All
others out)
Must be
the same
as the
factory
setting.
Strap
None Used
DIP
Switch
None Used
Rotary
Switch
None Used
Switch
None Used
Notes:
Note 1: See Figure 4–1.
Note 2: There are no customer–definable options on this circuit pack. Information is shown for reference only. Use this
data for verification during initial DPP system installation and/or circuit pack replacement to make sure the replacement
circuit pack is set up the same as the circuit pack being replaced.
