OM-NI 2/20
15
TOUCH SCREEN DISPLAY
The MAIN screen appears after power is applied and
boot-up. The center button turns the system on or off. It
also resets any fault codes once the fault has cleared.
When the system is turned on the Waiting indicator to the
will illuminate as the system times out. After time-out
the Running indicator will illuminate. If a fault condition
exists, the system shuts down and the Alarm indicator
illuminates. A fault description is displayed at the bottom
of the screen.
Pressing the Status button to the left will take you to the
Status screen.
The Factory button is reserved for factory personnel and
trained service technicians.
Display Screen
On the Status screen there are indicators for sensor status,
system operation and fault conditions. To the right of the
Compressor, Auger and Raw Water Pump is a readout of
the amperage draw for each of those loads. Return to the
Main screen by pressing the button to the bottom left.
