background image

3

3.

3.

GENERAL WARNINGS

 

Before you install and place in operation
the appliance you carefully read the
present handbook that offers important
information

 

Keep the handbook carefully for future
use for the operators or for case of after-
sale

 

 This appliance is intended for special
industrial use and has been studied for
frying. Any other use is deemed improper.

 

This appliance  should be used by
educated personnel and it is supervised
at the duration of operation

 

Disconnect the appliance in case of
damage or bad operation

 

For repair you are addressed only in
permitted centre of technical support of
constructor and require the placement of
original parts

 

The above instruction is for the safety and
the correct function of the appliance not to
cause damages.

 

Don't use for the cleaning of steel
products that contain chloride even if they
are dissolved

 

Do not use corrosive substances in order
to you clean the flooring under the
appliance

4.

4.

ECOLOGY AND ENVIRONMENT

All the materials of packing are compatible with the
environment. They can be stored without danger or be
burn at an authorised incineration plant.

 4.2 USE

The appliances have been studied with ' test
laboratory for the correct function. In any case in order
to decrease the consumption of energy recommend it
to avoid the use of appliance without foods in it

4.3 CLEANING

It is recommended For the cleaning of appliance
(internal and external) with products that have
biodegradable at least 90%.

 4.4 RECYCLING

In the end of cycle of life of product don't leave the
appliance surrounding.
The appliance manufactured from metal materials (of
stainless steel, iron, in percent bigger the 90%. These
materials may therefore be scrapped in accordance
with local waste disposal regulations at a conventional
recycling plant.
Make useless the appliance that you intend in order to
recycling disposal the electric cable.

Summary of Contents for FL15











Reviews: