5
4. SAFETY DEVICE
The appliance it allocates the following safeties:
4.1 Safety fuse
of protection placed on the control panel
PCB. To replace them loosen the retainer cap and
replace the burned safety with other (benefit this price is
entered in the label, in the point of safety.)
4.2 Safety Chamber Thermostat
with manual reset,
locate rear the general switch. The reset of re-
establishment should be executed from specialised
technical personnel, afterwards the obliteration of causes
of the fault.
5. OPERATION CONTROL.
-
place on the operation of the appliance
according to the directives of chapter
-
Explain the operator about the operation and
the interventions of regular maintenance and
cleaning of appliance with the help of handbook.
Attention
-
At the duration of operation be careful the hot
areas of exterior surface.
6. SERVICING
All components that require regular maintenance are
reached by opening.
The front panel for PCB, General Switch, Safety
Thermostat, and Temperature Sensor.
The back cover Motor - transformer – micro switch.
7. TROUBLESHOOTING
Even at the regular use of appliance can present
dysfunctions.
The heating elements does
not activate or is inefficient
Possible causes:
•
Damage in the heating elements
•
Check the contactor coil relative to the
damaged component
•
Damage of thermostat sensor with
•
Damage of controller
•
Fuse safety
Temperature reading is erratic
Possible causes
:
•
Damage of electronic controller.
•
The sensor of detection temperature is
dirty, or has been interrupted.
Summary of Contents for FL15
Page 10: ...10 ...
