3.1 TURNING ON THE APPLIANCE.................................................................
After making sure the appliance has been correctly connected to electricity, you can
start using it.
•
Depending on the heating requirement select the upper or lower heating
element and set thermostat (0-300°C or 60-400°C). The thermostats with the
corresponding heating elements will control the chamber’
s temperature (picture
1).
•
During operation indicating lamp is on.
•
For chamber’
s lighting set lighting switch to position 1 (picture 2).
•
For the ventilation of the chamber roll the operation knob at left side of the
appliance (picture 3).
3.2 CLEANING AND MAINTENANCE...............................................................
Turn off the heating elements before any cleaning or maintenance procedures. Let the
appliance cool and make sure it has been unplugged from the main supply.
Never use running water to clean the appliance.