2.1 INSTALLATION OF THE APPLIANCE.......................................................
After making sure the appliance is intact, place it in position so that it is stable and
there is adequate operating space around it.
Can be also place a same type electrical oven or heating chamber, or on a simple iron
base.
Attention !
To avoid accidents, keep all packing materials (cardboard, plastic bags,
metal items, etc) away from children.
Important !
Install the oven on a flat non-flammable surface, away from flammable
walls.
2.2 ELECTRICAL CONNECTION......................................................................
For models (F80/F80T/F81T/F135/F135T/F136T/F65A/F70T/F80P) remove the right
cover of the appliance. For models (F50/CORFU/RHODES/CRETE) remove the back
side cover of the appliance.
•
Enter a suitable supply cord through the gland.
•
Depending on the available power supply connect the cables.
. Single phase power supply
HO7RNF
3x2.5
3x4
3x6
Remove the provided bridges
and short circuit L1, L2.
Connect the phase to L1 or L2,
the neutral to 1 or 2
and earth to earth terminal.
F50
CORFU
F80
F80T
F81T
RHODES
CRETA
F135
F135T
F136T
F80P
b. Two phases power supply
HO7RNF 4x2.5
HO7RNF 4x4
Connect the phases to L1, L2.
Connect the earth neutral to 1 or 2.
Connect the earth.
F80
F80T
F81T
RHODES
F65A
F135
F135T
F136T
CRETE
c. Three phases power supply
HO7RNF 5x4
HO7RNF 5x2.5
Connect the phases to L1, L2.
Connect the earth neutral to 1 or 2.
Connect the earth.
F70T
F80P
F135/F135T
F136T/CRETE
Connect P.A. terminal to water piping using a 10 mm² wire.
IT IS STRONGLY RECOMMENDED TO USE A QUALIFIED ELECTRICIAN
FOR ALL ELECTRICAL CONNECTIONS.
THE MANUFACTURER CANNOT BE HELD
RESPONSIBLE
FOR
ACCIDENTS AND DAMAGE CAUSED TO PERSONS, ANIMALS OR PROPERTY
DUE TO NONCOMPLIANCE WITH THESE INSTRUCTIONS.